Components | DMS Components

Products

Components

About
Products
Manufacturers
Order
Resources
Careers
News
Contact

Filter

0.8 - 1.05%
0.35 - 0.50 %

Air Ejectors
Angle Pins
Bushings
Couplings
Date Stamps
Gate Inserts
Leader Pins
Line Pads
Locating Rings
Locks
Shut-Offs
Sintered Vents
Slides
Spacer Plates
Springs

0.7 mm
0.8 mm
4.8 mm
5.2 mm
7.8 mm
9.7 mm

50 + 5 HRC
52 + 3 HRC

1560 mm²

Air Ejectors - Filtered Metric

Air Ejectors - Plunger Style Metric

Air Ejectors - Standard

Angle Pins with Radiused Heads

Please select your desired length, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD LibraryThese pins are supplied with a spherical radius premachined on the head, which eliminates angle grinding usually required on the head. To install on a specific angle, use the chart to determine counterbore depth.Installation Notes: Cut angle pin to length as required to obtain required travel on the slide. The angle pin works on angle in clearance hole in slide to push the slide and create travel.

Components - Locating Rings

Custom Mold Bases

North American built mold bases manufactured in Windsor Ontario. Standards and custom sizes available.*Please contact DMS to request a quote for your custom mold base requirements. View CAD Library

Double Date Stamp

Please select your desired length, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD LibraryTo order — Add the last two digits of the start or base year to catalog number. Example for start or base year of 2023: FD-08051223Replaces the need for 2 separate date stampsNo need to machine 2 separate holesMinimum space required for installationSpecial engraving available upon request.Material: INOX. 1.4034 Hardened 51 ± 3 HRCMaximum working temperature 100°CThis is a CUMSA patented system

Dual Ring Date Stamps

Please select your desired length, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD LibraryTo order — Add the last two digits of the start or base year to catalog number. Example for start or base year of 2023: MD-202023

E Side Locks

E Side Locks - Graphite Impregnated

E Side Locks - Treated

Front Removable Date Stamps - Replacement Bodies

Front Removable Date Stamps - Replacement Inserts (with springs)

Front Removable Date Stamps - Replacement Springs

Front Removable Date Stamps - Series "E" (Insert Assemblies)

Please select your desired diameter, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD Library* When ordering add the year required to the part number (M05x23) **When ordering specify beginning yearMaterial: 420 Stainless; 1.4021;46Hrc+/- 2Provides part traceabilityMaximum working Temperature: 300FMarkings are Laser etched. Insert changes can be done from parting line Press fit installation required Interchangeable with DME Front Removable or Progressive C-series

Gib Assemblies

Guide Locks

Please select your desired length, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD LibraryBecause Guide Locks can be used inside the mold as well as at the parting line, DMS has added a jack screw hole to the male interlock. This allows removal without damage to the mold. Also added is a 5° angle on each end of the male.Male: AISI D2 (58-60 Rc) - Titanium Nitride Coated 78-80 RcFemale: AISI 1045 (60-62 Rc) - Black Oxide Finish