Gate Inserts | DMS Components

i-mold Contourable S1 Series

Diameter (Inside): 0,6 | Diameter: 6 | Variant: TGR

i-mold Side Gate Contourable - SGC

i-mold Standard S2 Series

i-mold Tunnel Gate Contourable - TGC

i-mold Tunnel Gate High Contours - TGLL, TGML, TGHL

Diameter (Inside): 4 | Diameter: 8 | Variant: TGLL-1

i-mold Tunnel Pointed Side - TPS Contourable

Diameter (Inside): 4 | Diameter: 6 | Variant: TPS-S

In-Mold Edge Gate Cutting (Cutting Pins)

In-Mold Edge Gate Cutting (Cutting Sprue Bushes)

Kontourflow GTK - Gate Insert

Please use the provided PDF to get full measurement breakdown for your selected catalogue number.Download Full PDF View CAD LibraryFor tunnel gating of medium-to-large components. Supports contouring to a depth of 11,5 mm. Suitable for gate diameters up to 3,5 mm and shot weights up to 1,200 g per insert. The Maxiflow range can be used to process all common plastics, including reinforced types.

Maxiflow GXK - Gate Insert

Gate Position: 0.7 mm

For tunnel gating of medium-to-large-sized mouldings.Supports contouring to a depth of 10 mm. Suitable for gate diameters up to 3.5 mm and shot weights up to 1,200 g per insert. Available types are GXK-1, GXK-2 and GXK-3.The Maxiflow from EXAflow® can be used to process all common plastics, including reinforced types (e.g., PA comprising 50% glass fiber). Download Full PDF View CAD Library

Midiflow GMK - Gate Insert

Gate Position: 0.8 mm

For rear surface gating of small to medium-sized mouldings. Supports contouring to a depth of 8 mm. Suitable for gate diameters up to 1.8 mm and shot weights up to 200 g per insert.Available types are GMK-1, GMK-2 and GMK-3. Suitable for all common plastic, including reinforced types. Download Full PDF View CAD Library

Miniflow GTM - Gate Insert

Ringelflow GRF-5 - Gate Insert

For rear surface gating of small-to-medium sized mouldings.Supports gate diameters up to 1.8 mm and shot weights up to 100 g per insert. The GRF-1 from EXAflow® can be used to process all common non reinforced plastic types. For filled and brittle plastics please contact us beforehand! Download Full PDF View CAD Library

Standardflow GTE - Gate Insert

Gate Diameter (d2): 0,8 | Width (mm): 10

Standardflow GTR - Gate Insert

Please select your desired length, and variant to produce the catalogue number for your product. Please use the provided chart image to get full measurement breakdown for your selected catalogue number. Round-type gate inserts (GTR) can be secured against inadvertent rotation by a parallel pin and key system. In most cases this will not be necessary since the gate insert is adequately secured by the bolt.Download Full PDF View CAD Library